Updated July 29, 2026.
Short answer: a light blocker helps only when room light is entering around the display optics. It will not fix every bright line or ghost image. On XREAL 1S, first correct nose-pad and temple position, test the darkest electrochromic setting, and repeat the scene in a dark room. If the reflection disappears in darkness or when you shade the gap beneath the lenses with your hand, a blocker is likely to help. If it remains in the same position in a dark room, contact XREAL support before buying an accessory.
Why bottom reflections happen
Display glasses combine a bright internal image with partially transparent optics. Light entering from below can illuminate optical surfaces and appear as a haze or duplicate edge under high-contrast content. A poor eye-to-optic position can also expose an edge that looks like reflection. These two causes need different fixes.
The six-step XREAL 1S test
- Clean the optical surfaces. Use the supplied clean microfiber cloth. Smears scatter light and can imitate glare.
- Try all three included nose-pad sizes. XREAL 1S ships with S, M, and L pads. Choose the size that centers the full display without forcing the bridge.
- Try the three temple positions. Small angle changes can move an optical edge out of view.
- Set electrochromic dimming to its darkest manual level. The 1S also offers automatic transparency, but manual dark is the cleaner diagnostic.
- Shade only the bottom gap with your hands. Do not touch the lenses. If the reflection drops immediately, ambient light is the likely cause.
- Repeat in a dark room. If the artifact remains equally strong, a light blocker is unlikely to solve it.
Which fix matches which symptom?
| What you see | Most useful first fix |
|---|---|
| Reflection changes with room lighting | Increase dimming, change seat/window angle, then consider a bottom or full blocker |
| Bottom edge appears only at one wearing height | Change nose-pad size and temple angle |
| Haze improves after cleaning | Keep a dedicated microfiber cloth and avoid touching optical surfaces |
| Artifact is unchanged in a fully dark room | Check firmware and contact XREAL support |
| Full image is cropped or blurry | Fix alignment or prescription insert position; a blocker is not the answer |
Do not assume XREAL One accessories fit XREAL 1S
The SGG SHADE One is currently labeled for XREAL One, not XREAL 1S. We are not calling it 1S-compatible until model-level fit is verified. XREAL 1S owners should compare the attachment geometry or ask us for a fit check before ordering any One-branded blocker. The same caution applies to universal blockers: “universal” describes an accessory style, not guaranteed clearance around every sensor, vent, hinge, or optical surface.
When to use a blocker
A blocker makes the most sense for movies, games, and high-contrast text in a bright cabin or room. It makes less sense while walking, navigating, or doing anything that requires awareness of the surroundings. The 1S already includes adaptive transparency; use the built-in control first, then add physical light control only for the situations that still need it.
Manufacturer and safety sources checked
- XREAL 1S official specifications and adaptive-transparency overview
- XREAL 1S official shop page and box contents
- XREAL 1S support page
Compatibility and instructions can change. Check the manual for your exact model before modifying, cleaning, packing, or charging it.